Purchasing Lead Materiels
1. Purchasing Categories: lead oxide material, lead slag.
2. Trial Order Quantity: 200Mt min. No limitation for maximum quantity, the more the better.
3. Purchasing Quality Standard for Reference & Instruction
| Category |
Group |
Materiel Name |
Quality and Shape |
Lead oxide and Lead Alloy |
Lead oxide materiel |
Lead oxide |
Lead oxide ash from all kinds of non-ferrous smelting factory with Pb20% min, In lump or powder form both can be accepted. |
Waste Lead Alloy |
Lead alloy scraps |
Including all kinds of the non-ferrous alloy scraps that contain lead.
Lead and antimony alloy scraps, copper and lead alloy scraps, tin and lead alloy scraps etc. |
Lead ash |
Lead ash |
Lead ash
Lead anode slime |
Lead ash from non-ferrous smelting factory, anode slime from electrolytic copper, electrolytic lead and electrolytic zinc. |
Lead Slag |
Lead Slag |
Lead Slag |
Including all kinds of the slag from the smelting plants.
Grade 1: Lead Slag Pb≥80%,Moisture≤8%
Grade 2:Lead Slag Pb≥60%,Moisture≤8%
Grade 3: Lead Slag Pb≥30%,Moisture≤8%
Grade 4:Lead Slag Pb≥10%,Moisture≤8%
(If Lead metal content is less than 30%, renegotiation according to the specific content) |
4.Quality reference: Zn＜5%，As＜0.8%,S＜4%,Seller provide the specification and Fe content
Requirement: Lead slag should be recycled according to Categories, groups and grade which is presented in the standard. It can’t be mixed
It's not allowed to mix sealed container, flammable, explosive, toxic, radioactive materials and medical waste into waste lead material.
Under transportable condition, the biggest external dimension of single lump of waste lead can be negotiated and determined by both parties of seller and buyer and indicated in the contract.
Inspection and Acceptance
The inspection for lead materiel could be consigned to the third party (such as AHK, SGS, ALEX STEWART), the seller should guarantee the quality conforming to the stipulation of the contract. |
